MES / Manufacturing Execution
See your production as it runs
Orders on the shop floor, machine data the moment it arrives, and the loss behind every stopped minute. On the same platform as your maintenance, warehouse and procurement.
Getting started
Three steps to a live shop floor
Plan the order
Production makes the order from its routing, a spreadsheet or the ERP, queues its operations on the work centres and sets the sequence. The floor sees what runs now and what comes next.
Run it at the machine
Terminal is the operator's screen: start the operation, confirm good units and scrap, name the stop and call for help without leaving the station.
Measure what it cost
Every stop carries its reason and every count the person who confirmed it. Production turns them into OEE per work centre and shift, with availability, performance and quality behind it.
The production modules
Plan it, run it, see it
Production, Terminal and Layout are the modules the shop floor runs on. They share the devices, users and permissions of maintenance and the warehouse, so an unplanned stop named at the terminal takes off the same machine that maintenance repairs and the Layout shows.
- ProductionWhat to make, where, and how far it has got. Build orders from your routings, queue them on each work centre, and watch progress come back from the floor.See Production
- TerminalThe operator's screen at the machine. Start the work, confirm what was made, name the stop and call for help without leaving the station.See Terminal
- LayoutYour plant on one screen. An interactive floor plan where every device is a live pin with status, faults, and sensor readings.See Layout
What you get
From the machine to the management report
Routings and production orders
Describe each product once as a routing, make orders from it by hand, from a spreadsheet or from the ERP, and watch good units, scrap and time come back against the plan.
See ProductionA live dispatch list
Every work centre with its queue, the calls for help and the day's stops on one screen, and with a machine connected, whether it is running and what it has counted.
See ProductionThe terminal at the machine
Start, pause and confirm quantities on buttons sized for gloves, with the operation's instructions, checklist and drawings on the same screen.
See TerminalDowntime you can explain
Every stop is named at the terminal, planned or unplanned, or opened by the machine itself and named there. A breakdown becomes a fault event, and the lost minutes stay with the work centre and the order.
See TerminalOEE and Pareto root-cause analysis
OEE per work centre and shift, with availability, performance and quality beside it, and the stop reasons ranked by the time they cost, so the first fix is the one that pays.
See ProductionInteractive plant layout
Your plant on one screen, every device a live pin with status, faults and sensor readings.
See Layout
Use case
Lower your energy costs.
Energy beside the output: what a press draws while it waits for the next order, metered per machine and line in the same system that runs the order.
The same watch covers the machine itself: vibration, temperature or pressure drifting out of pattern opens the work order before the breakdown does.
One platform
Production is one area of the platform
MES runs next to maintenance, warehouse, procurement and quality in the same system, on the same devices, under the same permissions. A stop on the floor can raise the work order, pull the spare part and order the replacement, and a finished order books what it made into the same stock, without leaving Mesonify.
PlatformSee it running on your own plant.
Ask for a demo on your own production data.